LGB

One rail is interrupted or gapped on this section of track. The interrupter track can be used for the circuit for an insulated block in front of signals. A hidden terminal clip facilitates electrical...

Wheel blocks are used to keep cars in place on grades and on sidings and keep them from rolling away.A package has 12 pieces

Insulated rail joiners allow you to set up isolated block sections of track. To do this the metal rail joiners must be replaced by these sturdy plastic rail joiners.A package has 4 pieces.

This track bumper with a lighted lantern can be mounted on straight sections of track.

This is a model of a track bumper with rails bent up as was done in the early days of railroading to safeguard the ends of sidings. Such track bumpers can still be found at stations.

The shuttle train automatic circuit box allows you have a train shuttle between two stations. An electronic circuit stops the train at the station and then has it reverse direction and go back. This...

This is a manual uncoupler for cars with standard LGB hook-and-loop couplers. The manual uncoupler can be installed in straight sections of track. When symmetrical couplers are installed, use two...

The electric uncoupler track allows you to uncouple cars with LGB loop-and-hook couplers and knuckle couplers by remote control. The lighted “E” signal shows the location of the uncoupler...

The 600 mm / 23-5/8“ long straight section equals two LGB 10000 sections of track.

The 1,200 mm / 47-1/4“ long straight section equals four LGB 10000 sections of track.

These wire holders help keep your wiring manageable. The holder attaches to the side of a section of LGB track. The wires can then be laid easily in the opening.

The curved track in radius R1 is one of the basic pieces in the LGB track assortment. 12 sections of R1, 30° track make a circle (360°).